Your 2 items
Mix sizes or swap productsFree worldwide shipping · 7–15 days
Cold wind and rain can make even a short motorcycle ride uncomfortable. These insulated handlebar mitts surround your hands with thick plush lining and a waterproof Oxford fabric exterior, helping keep your hands warmer and sheltered while you ride.
Made for Cold-Weather Rides
- Thick Plush Insulation: Soft inner lining helps retain warmth around your hands during cold-weather riding.
- Waterproof Oxford Exterior: The upgraded outer fabric helps shield your hands from rain and wet riding conditions.
- Wind Protection: Enclosed handlebar coverage reduces direct exposure to cold air while riding.
- Reflective Side Detailing: A broad reflective strip improves the visibility of the covers when illuminated by headlights.
- Roomy Hand Opening: The structured design provides space to reach your handlebar grips and operate the controls.
- Textured Outer Cuffs: Reinforced, textured entry sections provide a more structured hand opening.
- Secure Drawstring Fit: Adjustable fastening cords help hold the covers in position on compatible handlebars.
Compatibility & Fit
Designed for compatible motorcycles, scooters and three-wheeled motorcycles with suitable handlebar and mirror configurations.
The covers are installed over the handlebar grips, allowing your hands to enter the plush-lined interior.
Approximate dimensions: 28 cm in length and 35 cm across the main cover, according to the supplier's measurement diagram.
Check your mirror stem location, handlebar controls and available clearance before ordering.
Universal-style attachment does not guarantee compatibility with every motorcycle. Handguards, bar-end mirrors and oversized switch housings may affect installation.
Waterproof & Winter Protection
The upgraded Oxford fabric exterior is designed to repel rain and help block cold wind.
Inside, the thick plush lining provides an additional layer of insulation around your hands during winter rides.
The extended outer panels provide coverage around the grip area, while the reflective detailing adds visibility when illuminated.
These covers have hand and mounting openings and are not completely sealed. Water may enter during prolonged heavy rain. They are not electrically heated.
How to Install
- Identify the left and right handlebar covers.
- Slide each cover over the corresponding handlebar grip.
- Position the mounting opening around the mirror stem or compatible attachment area.
- Tighten the drawstring to secure the cover in place.
- Adjust the outer cover so the hand opening faces the rider.
- Before riding, check the throttle, brake and clutch levers, switches and full steering movement.
The throttle must return freely, all controls must operate without obstruction, and you must be able to remove your hands immediately. Do not ride if the mitts interfere with any control.
Upgraded Construction
This version features waterproof Oxford fabric instead of the earlier PU exterior construction.
The soft insulated interior is designed to keep hands more comfortable in cold weather, while the textured cuffs and reflective panels complete the winter-focused design.
Interior plush color may vary between production batches. The lining color is selected randomly.
Before You Order
These are insulated handlebar covers, not conventional motorcycle gloves.
They are designed to remain attached to compatible handlebars during riding.
For additional protection, wear appropriate motorcycle riding gloves underneath.
Handlebar mitts are not crash-protective equipment. Confirm a secure fit and unrestricted operation before each ride.
What's Included
1 × Left Insulated Handlebar Mitt
1 × Right Insulated Handlebar Mitt
Integrated Drawstring Fasteners
Motorcycle and riding gloves are not included.
Orders are prepared within 1–3 business days and typically arrive within 7–15 business days after dispatch. Tracking details are sent by email as soon as your order ships.
Return requests are accepted within 30 days of delivery. Eligible items must meet the return conditions in our policy. If an item is damaged, defective, incorrect, or not as described, REVKOVA will arrange the appropriate solution. Approved refunds are issued to the original payment method within 2–7 business days.
Swap item
No matching products.
Warm Winter Motorcycle Handlebar Mitts
BUY MORE, SAVE MORE
Choose your quantity
BUILD YOUR BUNDLE
Choose a product and variant for every empty slot.
Discount applied automatically in the cart and at checkout.
Preparing Order 1–3 business days
Transit Estimates 7–15 business days
Warm Winter Motorcycle Handlebar Mitts
Warm Winter Motorcycle Handlebar Mitts
COLOR :
BUY MORE, SAVE MORE
Choose your quantity
BUILD YOUR BUNDLE
Choose a product and variant for every empty slot.
Discount applied automatically in the cart and at checkout.
Preparing Order 1–3 business days
Transit Estimates 7–15 business days
Details & Size Guide
Cold wind and rain can make even a short motorcycle ride uncomfortable. These insulated handlebar mitts surround your hands with thick plush lining and a waterproof Oxford fabric exterior, helping keep your hands warmer and sheltered while you ride.
Made for Cold-Weather Rides
- Thick Plush Insulation: Soft inner lining helps retain warmth around your hands during cold-weather riding.
- Waterproof Oxford Exterior: The upgraded outer fabric helps shield your hands from rain and wet riding conditions.
- Wind Protection: Enclosed handlebar coverage reduces direct exposure to cold air while riding.
- Reflective Side Detailing: A broad reflective strip improves the visibility of the covers when illuminated by headlights.
- Roomy Hand Opening: The structured design provides space to reach your handlebar grips and operate the controls.
- Textured Outer Cuffs: Reinforced, textured entry sections provide a more structured hand opening.
- Secure Drawstring Fit: Adjustable fastening cords help hold the covers in position on compatible handlebars.
Compatibility & Fit
Designed for compatible motorcycles, scooters and three-wheeled motorcycles with suitable handlebar and mirror configurations.
The covers are installed over the handlebar grips, allowing your hands to enter the plush-lined interior.
Approximate dimensions: 28 cm in length and 35 cm across the main cover, according to the supplier's measurement diagram.
Check your mirror stem location, handlebar controls and available clearance before ordering.
Universal-style attachment does not guarantee compatibility with every motorcycle. Handguards, bar-end mirrors and oversized switch housings may affect installation.
Waterproof & Winter Protection
The upgraded Oxford fabric exterior is designed to repel rain and help block cold wind.
Inside, the thick plush lining provides an additional layer of insulation around your hands during winter rides.
The extended outer panels provide coverage around the grip area, while the reflective detailing adds visibility when illuminated.
These covers have hand and mounting openings and are not completely sealed. Water may enter during prolonged heavy rain. They are not electrically heated.
How to Install
- Identify the left and right handlebar covers.
- Slide each cover over the corresponding handlebar grip.
- Position the mounting opening around the mirror stem or compatible attachment area.
- Tighten the drawstring to secure the cover in place.
- Adjust the outer cover so the hand opening faces the rider.
- Before riding, check the throttle, brake and clutch levers, switches and full steering movement.
The throttle must return freely, all controls must operate without obstruction, and you must be able to remove your hands immediately. Do not ride if the mitts interfere with any control.
Upgraded Construction
This version features waterproof Oxford fabric instead of the earlier PU exterior construction.
The soft insulated interior is designed to keep hands more comfortable in cold weather, while the textured cuffs and reflective panels complete the winter-focused design.
Interior plush color may vary between production batches. The lining color is selected randomly.
Before You Order
These are insulated handlebar covers, not conventional motorcycle gloves.
They are designed to remain attached to compatible handlebars during riding.
For additional protection, wear appropriate motorcycle riding gloves underneath.
Handlebar mitts are not crash-protective equipment. Confirm a secure fit and unrestricted operation before each ride.
What's Included
1 × Left Insulated Handlebar Mitt
1 × Right Insulated Handlebar Mitt
Integrated Drawstring Fasteners
Motorcycle and riding gloves are not included.
Shipping
Orders are prepared within 1–3 business days and typically arrive within 7–15 business days after dispatch. Tracking details are sent by email as soon as your order ships.
Returns
Return requests are accepted within 30 days of delivery. Eligible items must meet the return conditions in our policy. If an item is damaged, defective, incorrect, or not as described, REVKOVA will arrange the appropriate solution. Approved refunds are issued to the original payment method within 2–7 business days.
Details & Size Guide
Details & Size Guide
Cold wind and rain can make even a short motorcycle ride uncomfortable. These insulated handlebar mitts surround your hands with thick plush lining and a waterproof Oxford fabric exterior, helping keep your hands warmer and sheltered while you ride.
Made for Cold-Weather Rides
- Thick Plush Insulation: Soft inner lining helps retain warmth around your hands during cold-weather riding.
- Waterproof Oxford Exterior: The upgraded outer fabric helps shield your hands from rain and wet riding conditions.
- Wind Protection: Enclosed handlebar coverage reduces direct exposure to cold air while riding.
- Reflective Side Detailing: A broad reflective strip improves the visibility of the covers when illuminated by headlights.
- Roomy Hand Opening: The structured design provides space to reach your handlebar grips and operate the controls.
- Textured Outer Cuffs: Reinforced, textured entry sections provide a more structured hand opening.
- Secure Drawstring Fit: Adjustable fastening cords help hold the covers in position on compatible handlebars.
Compatibility & Fit
Designed for compatible motorcycles, scooters and three-wheeled motorcycles with suitable handlebar and mirror configurations.
The covers are installed over the handlebar grips, allowing your hands to enter the plush-lined interior.
Approximate dimensions: 28 cm in length and 35 cm across the main cover, according to the supplier's measurement diagram.
Check your mirror stem location, handlebar controls and available clearance before ordering.
Universal-style attachment does not guarantee compatibility with every motorcycle. Handguards, bar-end mirrors and oversized switch housings may affect installation.
Waterproof & Winter Protection
The upgraded Oxford fabric exterior is designed to repel rain and help block cold wind.
Inside, the thick plush lining provides an additional layer of insulation around your hands during winter rides.
The extended outer panels provide coverage around the grip area, while the reflective detailing adds visibility when illuminated.
These covers have hand and mounting openings and are not completely sealed. Water may enter during prolonged heavy rain. They are not electrically heated.
How to Install
- Identify the left and right handlebar covers.
- Slide each cover over the corresponding handlebar grip.
- Position the mounting opening around the mirror stem or compatible attachment area.
- Tighten the drawstring to secure the cover in place.
- Adjust the outer cover so the hand opening faces the rider.
- Before riding, check the throttle, brake and clutch levers, switches and full steering movement.
The throttle must return freely, all controls must operate without obstruction, and you must be able to remove your hands immediately. Do not ride if the mitts interfere with any control.
Upgraded Construction
This version features waterproof Oxford fabric instead of the earlier PU exterior construction.
The soft insulated interior is designed to keep hands more comfortable in cold weather, while the textured cuffs and reflective panels complete the winter-focused design.
Interior plush color may vary between production batches. The lining color is selected randomly.
Before You Order
These are insulated handlebar covers, not conventional motorcycle gloves.
They are designed to remain attached to compatible handlebars during riding.
For additional protection, wear appropriate motorcycle riding gloves underneath.
Handlebar mitts are not crash-protective equipment. Confirm a secure fit and unrestricted operation before each ride.
What's Included
1 × Left Insulated Handlebar Mitt
1 × Right Insulated Handlebar Mitt
Integrated Drawstring Fasteners
Motorcycle and riding gloves are not included.
Shipping
Shipping
Orders are prepared within 1–3 business days and typically arrive within 7–15 business days after dispatch. Tracking details are sent by email as soon as your order ships.
Returns
Returns
Return requests are accepted within 30 days of delivery. Eligible items must meet the return conditions in our policy. If an item is damaged, defective, incorrect, or not as described, REVKOVA will arrange the appropriate solution. Approved refunds are issued to the original payment method within 2–7 business days.
More suggestions related to Warm Winter Motorcycle Handlebar Mitts
You may also like
Recently viewed
Products you view will appear here.
