Your 2 items
Mix sizes or swap productsFree worldwide shipping · 7–15 days
Cold handlebars can make winter rides uncomfortable. These USB-powered heated motorcycle grip wraps add adjustable warmth to your existing grips without replacing them. Choose from three heat settings to suit the conditions.
Keep Your Hands Warmer on Cold Rides
- 3 Heat Settings: Switch between low, medium and high heating levels using the integrated controller.
- USB Powered: Connect to a compatible 5V USB power source for heating.
- Wraparound Installation: Fits around existing handlebar grips, so you don't need to replace your original grips.
- Non-Slip Backing: The textured dotted underside helps the wraps stay positioned against the grips.
- Both Hands Covered: Two heating wraps provide warmth for the left and right handlebars.
Compatibility & Fit
Designed to wrap around existing motorcycle handlebars and grips.
Each heating wrap measures approximately 9.5 × 13.5 cm when laid flat.
Before ordering, check that the wraps can fit securely around your grips without interfering with the throttle, switches or other handlebar controls.
Compatibility depends on grip diameter, length and handlebar layout. Fit is not guaranteed for every motorcycle or scooter.
Heating & Power
The wired controller provides three heating levels:
High: Higher heat output for colder conditions.
Medium: Balanced warmth for regular cold-weather riding.
Low: Gentle warmth when less heating is needed.
The USB-A connector requires a compatible 5V power supply, such as a suitable motorcycle USB outlet or power bank.
A separate power supply is not shown as included. Heating performance depends on the connected power source.
How to Install
1. Position each heating wrap around its corresponding motorcycle grip.
2. Secure the wraps with their fastening edges, keeping them snug against the grips.
3. Route the cables away from the throttle, steering movement and other moving parts.
4. Confirm that the throttle returns freely and that all handlebar controls operate normally.
5. Connect the USB plug to a compatible 5V power source and select your preferred heat level.
What's Included
2 × Heated Handlebar Grip Wraps
1 × Attached USB-A Cable with Heat Controller
Motorcycle, original grips and external power source are not included.
Before You Ride
Make sure both wraps are firmly secured before riding. Never use them if they interfere with throttle operation, steering or controls.
Keep USB electrical connections away from water and disconnect the power when not in use.
Do not use damaged cables or leave the heating wraps operating unattended.
Orders are prepared within 1–3 business days and typically arrive within 7–15 business days after dispatch. Tracking details are sent by email as soon as your order ships.
Return requests are accepted within 30 days of delivery. Eligible items must meet the return conditions in our policy. If an item is damaged, defective, incorrect, or not as described, REVKOVA will arrange the appropriate solution. Approved refunds are issued to the original payment method within 2–7 business days.
Swap item
No matching products.
Motorcycle Heated Grip Wraps
BUY MORE, SAVE MORE
Choose your quantity
BUILD YOUR BUNDLE
Choose a product and variant for every empty slot.
Discount applied automatically in the cart and at checkout.
Preparing Order 1–3 business days
Transit Estimates 7–15 business days
Motorcycle Heated Grip Wraps
Motorcycle Heated Grip Wraps
PRODUCT :
BUY MORE, SAVE MORE
Choose your quantity
BUILD YOUR BUNDLE
Choose a product and variant for every empty slot.
Discount applied automatically in the cart and at checkout.
Preparing Order 1–3 business days
Transit Estimates 7–15 business days
Details & Size Guide
Cold handlebars can make winter rides uncomfortable. These USB-powered heated motorcycle grip wraps add adjustable warmth to your existing grips without replacing them. Choose from three heat settings to suit the conditions.
Keep Your Hands Warmer on Cold Rides
- 3 Heat Settings: Switch between low, medium and high heating levels using the integrated controller.
- USB Powered: Connect to a compatible 5V USB power source for heating.
- Wraparound Installation: Fits around existing handlebar grips, so you don't need to replace your original grips.
- Non-Slip Backing: The textured dotted underside helps the wraps stay positioned against the grips.
- Both Hands Covered: Two heating wraps provide warmth for the left and right handlebars.
Compatibility & Fit
Designed to wrap around existing motorcycle handlebars and grips.
Each heating wrap measures approximately 9.5 × 13.5 cm when laid flat.
Before ordering, check that the wraps can fit securely around your grips without interfering with the throttle, switches or other handlebar controls.
Compatibility depends on grip diameter, length and handlebar layout. Fit is not guaranteed for every motorcycle or scooter.
Heating & Power
The wired controller provides three heating levels:
High: Higher heat output for colder conditions.
Medium: Balanced warmth for regular cold-weather riding.
Low: Gentle warmth when less heating is needed.
The USB-A connector requires a compatible 5V power supply, such as a suitable motorcycle USB outlet or power bank.
A separate power supply is not shown as included. Heating performance depends on the connected power source.
How to Install
1. Position each heating wrap around its corresponding motorcycle grip.
2. Secure the wraps with their fastening edges, keeping them snug against the grips.
3. Route the cables away from the throttle, steering movement and other moving parts.
4. Confirm that the throttle returns freely and that all handlebar controls operate normally.
5. Connect the USB plug to a compatible 5V power source and select your preferred heat level.
What's Included
2 × Heated Handlebar Grip Wraps
1 × Attached USB-A Cable with Heat Controller
Motorcycle, original grips and external power source are not included.
Before You Ride
Make sure both wraps are firmly secured before riding. Never use them if they interfere with throttle operation, steering or controls.
Keep USB electrical connections away from water and disconnect the power when not in use.
Do not use damaged cables or leave the heating wraps operating unattended.
Shipping
Orders are prepared within 1–3 business days and typically arrive within 7–15 business days after dispatch. Tracking details are sent by email as soon as your order ships.
Returns
Return requests are accepted within 30 days of delivery. Eligible items must meet the return conditions in our policy. If an item is damaged, defective, incorrect, or not as described, REVKOVA will arrange the appropriate solution. Approved refunds are issued to the original payment method within 2–7 business days.
Details & Size Guide
Details & Size Guide
Cold handlebars can make winter rides uncomfortable. These USB-powered heated motorcycle grip wraps add adjustable warmth to your existing grips without replacing them. Choose from three heat settings to suit the conditions.
Keep Your Hands Warmer on Cold Rides
- 3 Heat Settings: Switch between low, medium and high heating levels using the integrated controller.
- USB Powered: Connect to a compatible 5V USB power source for heating.
- Wraparound Installation: Fits around existing handlebar grips, so you don't need to replace your original grips.
- Non-Slip Backing: The textured dotted underside helps the wraps stay positioned against the grips.
- Both Hands Covered: Two heating wraps provide warmth for the left and right handlebars.
Compatibility & Fit
Designed to wrap around existing motorcycle handlebars and grips.
Each heating wrap measures approximately 9.5 × 13.5 cm when laid flat.
Before ordering, check that the wraps can fit securely around your grips without interfering with the throttle, switches or other handlebar controls.
Compatibility depends on grip diameter, length and handlebar layout. Fit is not guaranteed for every motorcycle or scooter.
Heating & Power
The wired controller provides three heating levels:
High: Higher heat output for colder conditions.
Medium: Balanced warmth for regular cold-weather riding.
Low: Gentle warmth when less heating is needed.
The USB-A connector requires a compatible 5V power supply, such as a suitable motorcycle USB outlet or power bank.
A separate power supply is not shown as included. Heating performance depends on the connected power source.
How to Install
1. Position each heating wrap around its corresponding motorcycle grip.
2. Secure the wraps with their fastening edges, keeping them snug against the grips.
3. Route the cables away from the throttle, steering movement and other moving parts.
4. Confirm that the throttle returns freely and that all handlebar controls operate normally.
5. Connect the USB plug to a compatible 5V power source and select your preferred heat level.
What's Included
2 × Heated Handlebar Grip Wraps
1 × Attached USB-A Cable with Heat Controller
Motorcycle, original grips and external power source are not included.
Before You Ride
Make sure both wraps are firmly secured before riding. Never use them if they interfere with throttle operation, steering or controls.
Keep USB electrical connections away from water and disconnect the power when not in use.
Do not use damaged cables or leave the heating wraps operating unattended.
Shipping
Shipping
Orders are prepared within 1–3 business days and typically arrive within 7–15 business days after dispatch. Tracking details are sent by email as soon as your order ships.
Returns
Returns
Return requests are accepted within 30 days of delivery. Eligible items must meet the return conditions in our policy. If an item is damaged, defective, incorrect, or not as described, REVKOVA will arrange the appropriate solution. Approved refunds are issued to the original payment method within 2–7 business days.
More suggestions related to Motorcycle Heated Grip Wraps
You may also like
Recently viewed
Products you view will appear here.
